How to Maintain the Bearings of the Hollow Paddle Dryer

Requirements for maintaining the bearings of hollow blade dryers

The shaft of the hollow blade dryer bears the full load of the negative machine, so good lubrication has a great relationship with the life of the bearing. It directly affects the life and operation rate of the machine. Therefore, the injected lubricating oil must be clean and the seal must be good.

1. The newly installed wheel tyres are prone to loosening and must be checked frequently.

2. Pay attention to whether each part of the hollow blade dryer works normally.

3. Pay attention to check the degree of wear of the wearable parts of the hollow blade dryer, and pay attention to replace the worn parts at any time.

4. If the rotating gear is running, if there is an impact sound, stop and check it immediately and eliminate it.

5. If the bearing oil temperature of the hollow blade dryer rises, stop the machine immediately and check the cause to eliminate it.

6. On the plane of the bottom frame of the movable device, dust and other things should be removed to prevent the movable bearing from moving on the bottom frame when the hollow blade dryer encounters unbreakable materials, which may cause serious accidents.