Protein Feed Flash Dryer

Protein feed flash dryer

FEATURES

1. Heat source: steam, electric heating, heat transfer oil

2.  Material: Stainless steel, carbon steel, titanium, etc

3. Saving pretreatment before drying, crushing and screening after drying

4. High drying intensity, suitable for the drying of paste and filter cake

5. Compared with the box drying method, the energy can be saved 30-50% without crushing after drying;

6. There is no wall sticking on the equipment body

7. High thermal efficiency, fast drying, short heating time of materials, not easy to destroy the components of dry materials, especially conducive to the drying of heat sensitive materials

8. Continuous operation, suitable for mass production

9. Time saving: highly intelligent design, man-machine interface, one button operation, PLC automatic control of the whole process of equipment operation, online and remote control, manual operation

10. Labor saving: save labor cost and reduce labor intensity

11. Closed operation, no pollution to the environment;

12. Convenient installation: convenient installation and demolition, less floor area, can be installed indoor and outdoor

WORKING PRINCIPLE

The hot air enters into the bottom of the drier in tangent direction. Under the driving of the stirrer, a powerful rotating wind field is formed. The paste state materials enter into the drier through the screw feeder. Under the powerful function of the stirring vanes at high-speed rotation, the materials are distributed under the function of strike, friction and shearing force. The cake state materials will be smashed and contact the hot air fully and the materials are heated and dried. The dehydrated materials will go up with the hot-air flow. The step rings will stop and keep the big particles. Small particles will be discharged out of the drier from the center of the machine and the material will be collected by cyclone separator of dust collector. The wet or big particles will be swing towards to the wall by the centrifugal force function and the materials will be crushed again after fall down to the bottom.
  

APPLICATION

Organics: Atrazine (Pesticides), Cadmium Laurate, Benzoic Acid, Germicide, Sodium Oxalate, Cellulose Acetate, Organic Pigments, and etc. Dyes: Anthraquinone, Black Iiron Oxide, Indigo Pigments, Butyric Acid, Titanium Hydroxide, Zinc Sulfide, Azo Dye Intermediates, and etc. Inorganic: Borax, Calcium Carbonate, Hydroxide, Copper Sulfate, Iron Oxide, Barium Carbonate, Antimony Trioxide, Metal Hydroxides, Heavy Metal Salts, Synthetic Cryolite, and etc. Food: Soy Protein, Gelatinized Starch, Lees, Wheat Sugar, Wheat Starch, and etc.Suitable for food, chemical, pharmaceutical and other industries

TECHNICAL PARAMETERS

Note:
1. The evaporated amount of moistureis calculated when the temperature of inlet is l80oC and Ihe temperature of outlet is180oC and the temperature of outlet is 180oC;
2. Besides the models above mentioned, special specification can also be made as request;
3. The equipped capacity above mentioned is standard. The power can also be decreased in accordance with pracitcal condition.

Raw Material Example & Characteristics (based on Model XSG-6)